![]() ![]() The engine will remain running provided the access key fob is present and detected by the vehicle. ![]() Unlock your Outback’s doors using the keyless access function and remote keyless entry system.If your Subaru Outback is equipped with keyless access with push-button start system, you can enter and drive your vehicle without restarting the engine, otherwise the engine will turn off when you open any door on the vehicle. If the stop request is not received (for example, if the user is too far away from the vehicle), the fob will continue to flash once every 3 seconds.Įntering the vehicle while it is running via remote start The fob will flash and beep three times, indicating the engine has stopped. Method 2 (Remote Engine Starter Fob): Press and hold the fob button for at least 2 seconds to stop the engine. The engine stops and the doors remain locked. Method 1 (Key Fob): Press and hold the LOCK button on the key fob for three seconds. There are two methods to remotely shut off Subaru Outback’s engine. The fob button flashes once every 3 seconds.The side marker lights, tail lights, and parking lights remain illuminated.While the engine is idling via the remote engine start system, the following will occur. After engine startsĪfter your Outback engine starts, the following will occur. If the fob is not within range (the user is too far away from the vehicle), the fob will indicate two long flashes without beeping. The system will check certain safety preconditions before starting, and if all conditions are met, the engine will start within 5 seconds. The side marker lights, tail lights, and parking lights flash once.If the fob is within operating range of the system and the start request is received, the following will occur. Subaru Outback vehicles equipped with remote start system may come with Remote Engine Starter Transceiver which can also be used to remotely start the engine. Start engine with remote engine starter fob If the engine does not start after 3 additional attempts, the remote engine start request will be aborted. The system will not attempt to restart the engine if it determines a vehicle malfunction is preventing starting. If the engine turns over but does not start (or starts and stalls) the remote engine start system on Outback will power off and then attempt to start the engine 3 additional times. A valid key must be inside your vehicle to switch the ignition on and drive your vehicle. The vehicle remains secured when you have remotely started the engine. Once started remotely, the engine will run for 15 minutes and then shut down automatically.The horn honks, turn signal lights flash multiple times and the engine starts.Then press and hold the LOCK button for three seconds on the key fob. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |